Return to Tasmanian Apprenticeships/Traineeships

Certificate III in Engineering - Mechanical Trade

MEM30205

Conditions

• Available From 25/10/2006
• Duration in months, based on full-time employment 48 - Where MEM20205 Certificate II in Engineering - Production Technology has been completed the term would be reduced by a minimum of 6 months
• Available Part-time Yes - the following conditions apply:
  
  • The minimum number of hours of employment is 15 per week unless otherwise agreed by TTAC;
  • The maximum term of the training contract is no more than twice the nominal full time duration for the qualification;
  • The minimum term is no less that one and a half times the nominal full time duration for the qualification;
  • Industrial arrangements must allow for part-time employment.
• Notes This qualification has been replaced and was to be discontinued on 26 June 2020. ASQA extended the transition until 31 December 2020 and then ASQA again extended the transition period until 31 December 2021. Further to the above, on 26 February 2021, the Australian Skills Quality Authority (ASQA) agreed to extend the transition period of the following qualifications from the MEM05 Manufacturing and Engineering Training Package to 31 December 2022: • MEM10105 Certificate I in Engineering • MEM30805 Certificate III in Locksmithing • MEM31112 Certificate III in Engineering - Composites Trade • MEM31215 Certificate III in Engineering – Industrial Electrician • MEM30205 Certificate III in Engineering – Mechanical Trade • MEM30305 Certificate III in Engineering – Fabrication Trade • MEM40105 Certificate IV in Engineering • MEM50105 Diploma of Engineering – Advanced Trade • MEM20205 Certificate II in Engineering – Production Technology • MEM30105 Certificate III in Engineering – Production Systems • MEM30605 Certificate III in Jewellery Manufacture • MEM30705 Certificate III in Marine Craft Construction • MEM30905 Certificate III in Boating Services • MEM31010 Certificate III in Watch and Clock Service and Repair The extended transition period follows agreement from Skills Ministers to allow for workplace-based pathways to be required for the delivery of specified qualifications in Release 2.0 of the MEM Manufacturing and Engineering Training Package. This extension is granted to all registered training organisations (RTOs) delivering the qualifications listed above. The decision extends the transition period for these RTOs to continue training, assessment and issue Australian Qualifications Framework (AQF) certification. The qualifications will remain on relevant RTOs scope of registration until the end of the extended transition period, unless withdrawn from scope prior. ASQA will publish this decision on its website. If you have any questions about this decision, please contact transitionrequest@asqa.gov.au
  All apprenticeships/traineeships must comply with TTAC Policies and Guidelines

Workplace arrangements

• Employer Obligations The employer is responsible for ensuring compliance with the appropriate industrial award/agreement as specified in the training contract.
• Further Information

Subsidy

• Subsidy for qualification $6848.00
• Number of subsidised nominal hours 980
• Special Conditions None
• Subsidy available to existing employees Yes
• RTOs with User Choice agreements The list of RTOs which currently have a purchasing agreement can be found on the Skills Tasmania website at http://www.skills.tas.gov.au/learners/subsidisedcourses
• Notes A full list of Registered Training Organisations who deliver and assess this qualification is available on the Training.gov.au (TGA) website: http://training.gov.au;

School Based option

• School based available Yes
• Minimum annuals hours of training required
• Minimum annuals hours of study of TCE subjects required
• Conditions This qualification has been approved for delivery as a school-based traineeship or apprenticeship in Tasmania. Tasmanian school-based trainees and apprentices must comply with the requirements of TTAC Policy 12. TTAC Policy 12 should not be read in isolation of the other TTAC Policies & Guidelines.
• Other Information If you require further information please contact Skills Tasmania on 6165 6055 or visit our website at http://www.skills.tas.gov.au/apprenticeshipstraineeships/schoolbased.

Additional information

• Qualification Replaced MEM30298 Certificate III in Engineering - Mechanical Trade
• Last day sign-ups allowed for old qualification
• Travel subsidy Travel and accommodation allowances are payable to eligible apprentices and trainees who are required to travel either within Tasmania or interstate to attend structured training. Details of the allowances payable and eligibility requirements can be found at https://www.skills.tas.gov.au/apprenticeships_and_traineeships/information_for_learners_about_apprenticeships/accordions_2/travel_and_accommodation_allowance.
• Subsidies under other programs This qualification may be offered under other programs. Information on these programs can be found on the Skills Tasmania website at http://www.skills.tas.gov.au/funding